Signaling Conformance 3GPP TS 34.123-1 3G PCT

The primary reference is 3GPP TS 34.123-1, which details the "Prose Description" of test cases. In a professional lab environment, this is utilized alongside Part 2 (Implementation Conformance Statement) to identify applicable tests and Part 3 (TTCN scripts) for automated execution on specialized system simulators.

This standard applies to any hardware integrating 3G/WCDMA (UMTS) capabilities, including:

• Consumer Electronics: Smartphones, tablets, and wearable technology.
• Automotive Modules: Telematics Control Units (TCUs) and eCall systems.
• Industrial IoT: Smart meters, M2M gateways, and cellular routers.
• Legacy Systems: Critical infrastructure requiring 3G fallback support.

The testing scope is exhaustive, designed to stress-test every signaling state a device might encounter:

1. Idle Mode Behavior: Evaluation of cell selection and PLMN (Public Land Mobile Network) searching.
2. Radio Resource Control (RRC): Testing the setup, reconfiguration, and teardown of radio links.
3. Mobility Management (MM): Validation of location updates, handovers, and security authentication.
4. Session Management (SM): Ensuring stable PDP Context activation for data services.
5. Service-Specific Logic: Testing SMS, Voice, and emergency call handling.

Testing must be performed in an ISO/IEC 17025 accredited laboratory. For commercial market entry, the laboratory must be recognized by the Global Certification Forum (GCF) or the PTCRB. These credentials ensure that the test results are legally defensible and internationally recognized by network operators.

A standard test cycle typically spans 3 to 6 weeks, depending on:

• The number of supported frequency bands.
• The complexity of the device (e.g., Cat 24 support vs. legacy M2M).
• Regression requirements if firmware bugs are discovered during the initial "dry run."

For a successful PCT campaign, manufacturers usually provide:

• Main Samples: 2–4 production-ready units with accessible RF ports (conducted testing).
• Specialized Firmware: "Test Mode" software that allows the simulator to bypass security or force specific frequency bands.
• SIM Infrastructure: White SIM cards or programmable Test USIMs.

The cost of 3G PCT is variable and quoted based on the Test Case Count. Pricing structures generally include:

• Setup Fees: For system simulator configuration.
• Hourly/Daily Lab Rates: Reflecting the use of high-end equipment (e.g., Rohde & Schwarz or Keysight simulators).
• Certification Body Fees: Separate administrative costs for GCF/PTCRB listing.

To initiate the project, the following documentation is mandatory:

• ICS (Implementation Conformance Statement): A detailed checklist of device capabilities.
• Hardware/Software Version Declaration: To ensure the test report matches the final product.
• User Manual & Technical Specs: Detailing supported bands and power classes.
• Antenna Gain Specs: Necessary for calculating total radiated power if performing combined testing.